16-TLR-T-4

4 axis ±90° can be processed

Upper / left / right side of the material can be processed
continuous linkage.It's a necessary machine for mold processing industry.

4-axis-180-can-be-processed
Sliding-adsorption-block

Sliding adsorption block

Using German  Schmalz adsorption block, it is more convenient to process the left and right sides of the material. And it can finish the carving and cutting of plane materials efficiently

High power motorized spindle can easily process all kinds of materials

wood/MDF/metal/PVC/plastic all common materials can be cut and engraved. 7.5KW/9KW/12KW are available.International standard ISO and F63 also no problem.

High-power-motorized-spindle
Motor-drive

Motor & Drive

Leadshine stepper / Yaskawa/Delta / Panasonic / Fuji
According to machining accuracy requirements multiple brands available

Automatic lubrication system

vacuum plenum table surface is multi-zoned which allows the operator to easily switch from full sheet processing to smaller part processing (which requires a smaller segmented area). Zones can be turned off easily via control valves on the front of the machine. Gasketing can also be routed to accommodate various material sizes and styles.

Vacuum-table-makes-materials-more-secure
Automatic-tool-calibration-pad

Tool calibration makes processing accuracy higher

Automatic tool calibration pad is designed for easy and accurate recording of tool length off-sets

Smart control system

LNC control system based on computer operation mode more intuitive and simple. Manual Pulse Generator (MPG)
The MPG allows the operator to move around the machine, making for easy setup

Smart-control-system

TECHNICAL PARAMETERS

MM

Moel No. TLR-1325-4 LR-1530-4 LR-2040-4   Customized
  Working size   1300*2500mm   1500*3000mm   2000*4000mm
  Z-axis clearance   300mm/400mm/500mm
  Repeatability   ±0.03mm ×
  Drive system X and Y-axis   Helical rack and pinon ×
  Drive system Z-axis   ball screw ×
  Guide rails   20/25mm linear ball-bearing profile rails(HIWIN/PMI/THK)
  Motor & drive   YASKAWA(DELTA/FUJI)servo motor
  Spindle   4.5KW/6KW/9KW manual(ATC)all available

 

 

INCH

Moel No. TLR-1325-4 LR-1530-4 LR-2040-4   Customized
  Working size   51*98inch   59*118inch   79*157inch
  Z-axis clearance   11.8inch/15.7inch/19.7inch/
  Repeatability   ±0.001inch ×
  Drive system X and Y-axis   Helical rack and pinon ×
  Drive system Z-axis   ball screw ×
  Guide rails   0.8/1inch linear ball-bearing profile rails(HIWIN/PMI/THK)
  Motor & drive   YASKAWA(DELTA/FUJI)servo motor
  Spindle   4.5KW/6KW/9KW manual(ATC)all available

What materials can be processed ?

Wood
Wood
Foam
Foam
Aluminum
Aluminum
Aluminum
Aluminum

Contact Us

Invalid Email