Automatic loading system
Automatic material loading and unloading device is controlled using a numerical control system to feeding the pipes these pipes can be intelligently divided, loaded and connected seamlessly with the pipe cutter to ensure that only one pipe is transported to the delivery arm at a time. This decreases the cost of manually delivery materials
Automatic loading system
Automatic material loading and unloading device is controlled using a numerical control system to feeding the pipes these pipes can be intelligently divided, loaded and connected seamlessly with the pipe cutter to ensure that only one pipe is transported to the delivery arm at a time. This decreases the cost of manually delivery materials
Intelligent recognition
With contour recognition system, it can automatically identify standard round, oval, square and other special-shaped pipes.
Tubes realize non-inductive and high-efficiency detection, and realize the position deviation of the whole meter section’s cutting accuracy within 0.15mm.
Automatic clamping
The front and rear are equipped with fully automatic electric and pneumatic chuck, which can clamp automatically and determine the pipe center automatically. the diagonal adjustable range is 20-200mm.
Automatic support bracket
Support different types of pipes intelligently,The problem of long pipe deformation is solved
Machine Body
Adopts national standard square tube, 600 ℃ high-temperature heat treatment, 12 meters gantry milling with finishing, 24 hours cooling inside oven ensuring the long-term use of the machine without deform hence the accuracy of the machine is guaranteed.
Laser Cutting head RAYTOOLS / WSX
TECHNICAL PARAMETERS
| Model No. | TLF-6TA | TLF-9TA |
| Working Area | 6000mm | 9000mm |
| Laser output power | 1000W /1500W/2000W/3000W/4000W | |
| Effective Pipe Cutting Diameter | 20-350mm | |
| Effective Square Tube Cutting Diameter | 20*20-230*230mm | |
| Rectangular tube Min. Edge Length | 20-170mm | |
| Rectangular tube Max. Outer Circle Diameter | ≤ 230mm | |
| Effective Pipe Cutting Length | 3m/6m | |
| X/Y-axis positioning accuracy | 0.03mm | |
| X/Y-axis repositioning accuracy | 0.02mm | |
| Max.acceleration | 1.0G | |
| Single pipe support | 380KG | |
What materials can be processed ?
