4 axis ±90° can be processed
Upper / left / right side of the material can be processed
continuous linkage.It's a necessary machine for mold processing industry.
Sliding adsorption block
Using German Schmalz adsorption block, it is more convenient to process the left and right sides of the material. And it can finish the carving and cutting of plane materials efficiently
High power motorized spindle can easily process all kinds of materials
wood/MDF/metal/PVC/plastic all common materials can be cut and engraved. 7.5KW/9KW/12KW are available.International standard ISO and F63 also no problem.
Motor & Drive
Leadshine stepper / Yaskawa/Delta / Panasonic / Fuji
According to machining accuracy requirements multiple brands available
Automatic lubrication system
vacuum plenum table surface is multi-zoned which allows the operator to easily switch from full sheet processing to smaller part processing (which requires a smaller segmented area). Zones can be turned off easily via control valves on the front of the machine. Gasketing can also be routed to accommodate various material sizes and styles.
Tool calibration makes processing accuracy higher
Automatic tool calibration pad is designed for easy and accurate recording of tool length off-sets
Smart control system
LNC control system based on computer operation mode more intuitive and simple. Manual Pulse Generator (MPG)
The MPG allows the operator to move around the machine, making for easy setup
TECHNICAL PARAMETERS
MM
| Moel No. | TLR-1325-4 | LR-1530-4 | LR-2040-4 | Customized | |||
| Working size | 1300*2500mm | 1500*3000mm | 2000*4000mm | √ | |||
| Z-axis clearance | 300mm/400mm/500mm | √ | |||||
| Repeatability | ±0.03mm | × | |||||
| Drive system X and Y-axis | Helical rack and pinon | × | |||||
| Drive system Z-axis | ball screw | × | |||||
| Guide rails | 20/25mm linear ball-bearing profile rails（HIWIN/PMI/THK） | √ | |||||
| Motor & drive | YASKAWA(DELTA/FUJI)servo motor | √ | |||||
| Spindle | 4.5KW/6KW/9KW manual（ATC）all available | √ | |||||
INCH
| Moel No. | TLR-1325-4 | LR-1530-4 | LR-2040-4 | Customized | |||
| Working size | 51*98inch | 59*118inch | 79*157inch | √ | |||
| Z-axis clearance | 11.8inch/15.7inch/19.7inch/ | √ | |||||
| Repeatability | ±0.001inch | × | |||||
| Drive system X and Y-axis | Helical rack and pinon | × | |||||
| Drive system Z-axis | ball screw | × | |||||
| Guide rails | 0.8/1inch linear ball-bearing profile rails（HIWIN/PMI/THK） | √ | |||||
| Motor & drive | YASKAWA(DELTA/FUJI)servo motor | √ | |||||
| Spindle | 4.5KW/6KW/9KW manual（ATC）all available | √ | |||||
What materials can be processed ?
